Communicate with Supplier? Supplier
Annie Ms. Annie
What can I do for you?
Contact Supplier

Ningbo Nide Mechanical Equipment Co., Ltd.


Home > Products > Armature Manufacturing Machine > Wedge Inserting Machine > Automatic rotor wedge slot paper insertion machine

Automatic rotor wedge slot paper insertion machine

Automatic rotor wedge slot paper insertion machine

Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF
Min. Order: 1 Set/Sets
Delivery Time: 45 Days

Basic Info

    Model No.: ND-LSI-2WB

    Machine Size: Middle Type

    Customized Service: Available

    Certificate: CCC

    After-sales Service: Overseas Service Center Available

    Machine Color: RAL9010 Or As Per Customer Requirement

    Product Name: Slot Paper Insertion Machine

    Application: Motor Armature

Additional Info

    Packaging: wooden case package

    Productivity: 100sets

    Brand: Nide

    Transportation: Ocean,Land

    Place of Origin: China

    Supply Ability: 100 sets per year

    Certificate: ISO

Product Description

This Automatic rotor wedge slot paper insertion machine is equipped with a touch screen. All the related parameter can be displayed and shown. The wedge material and dimension can be as per customer's requirement. We also provide design service. This machine is easy to operate and it suits different armature types by changing the tooling.

Technical Parameter

Outside Dimension


Equipment Weight

250 Kg

motor Power

0.75 Kw

Work Voltage

380 VAC

Work Air Pressure

0.4-0.6 hMp

Manufacturing Product

Motor Rotor Insulated Paper

Rotor O.D. Range


Length of Insulation Paper

15-60 mm Adjustable

(MAX) Width of wedge

25 mm

Rotor Slot number

8-24 slots

Work procedure

Feeding-install fixture-plug in discharge


Pneumatic Mechanical Fixture

Feeding form


Lubricant form

Grease lubrication

Preparation before installment

Ensure the space is enough for the equipment operation with the dimension of 2330X1550X1450 (including the feeding guide way);

The installment floor should be strong and flat enough;

The power supply is AC 380V and the air pressure is 0.4~0.6Mpa;

Install support Mat: Put the equipment at required place and then adjust the height of the four support mat to 100mm, until there is no any vibration happen and finally tighten the screw of support mat;

Check whether the transferring parts, lock screw and the wire in the power controller are loose or not;

Malfunctions and Troubleshooting



A.Equipment not run even press start button

n Power and air supply

n Make sure all input signal from sensor are correct, travel switch (X10) is pressed, no signal from counter sensor (X2), push bar protector (X7) and no paper sensor(x6) and full feeding (X4). Also, there is signal from the mechanic hand (X0) and magnetic sensor (X1) of small cylinder.

n Brake is power off or not

n The feeding sensor(X3) should have signal if there is rotor on the guide way.

n Check cylinder and air pipe, make sure the pressure is between 0.4 and 0.6MPa

B. Fail to feed paper

n Check whether the paper is jammed in the feeding or discharging part, whether the upper press wheel is down pressed

C. No action or improper action in big cylinder

n Make sure the air pressure is 0.4 -0.6MPa

n Check whether the magnetic valve is functional.

n Adjust the release valve of feeding cylinder to 0.3 Mpa

D. Incorrect work indexing

n Adjust indexing screw

E. No action in small cylinder

n Check whether the mechanical valve is down pressed.

F. The position is not correct after reset

n Adjust the counter sensor screw and make sure it is on the right position after reset.

G. Paper jam

n If it was blocked in the forming tooling, the equipment would stop because of the protective switch on duty. If it was blocked behind the upper press wheel, press the stop button, now the mechanical hand still hold the rotors, press the single/automatic button to adjust it to manual, the mechanical hand will release the rotor, then take out the paper, and reset, adjust the button to automatic, and start the equipment.


Looking for ideal Rotor Wedge Inserting Machines Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Rotor Slot Paper Insertion Machine are quality guaranteed. We are China Origin Factory of Automatic Rotor Wedge Insertion Machine. If you have any question, please feel free to contact us.

Product Categories : Armature Manufacturing Machine > Wedge Inserting Machine

Send Inquiry


Ms. Annie


Send Inquiry



Mobile Phone:+8613738869026

Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, Zhejiang