Communicate with Supplier? Supplier
Annie Ms. Annie
What can I do for you?
Contact Supplier

Ningbo Nide Mechanical Equipment Co., Ltd.

Products

Home > Products > Armature Manufacturing Machine > Wedge Inserting Machine > Automatic armature slot wedge inserter

Automatic armature slot wedge inserter

Automatic armature slot wedge inserter

Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF
Min. Order: 1 Set/Sets
Delivery Time: 45 Days
Download:

Basic Info

    Model No.: ND-LSI-1W

    Machine Size: Middle Type

    Customized Service: Available

    Certificate: CCC

    After-sales Service: Overseas Service Center Available

    Machine Color: RAL9010 Or As Per Customer Requirement

    Production Name: Wedge Inserter

    Application: Motor Armature

    Function: Insert Wedge Into Armature Slot

Additional Info

    Packaging: wooden case package

    Productivity: 100sets

    Brand: Nide

    Transportation: Ocean,Land

    Place of Origin: China

    Supply Ability: 100 sets per year

    Certificate: ISO

Product Description


This automatic armature Wedge Inserting Machine is used to insert the wedge into armature slot, so as to insulate the armature. Machine can be customized as per customer's different requirement.


Technical Parameter of wedge inserting machine

Outside Dimension

910*880*1300(L*W*H)mm

Equipment Weight

250 Kg

motor Power

0.75 Kw

Work Voltage

380 VAC

Work Air Pressure

0.4-0.6 hMp

Manufacturing Product

Motor Rotor Insulated Paper

Rotor O.D. Range

φ20-φ55

Length of Insulation Paper

15-60 mm Adjustable

(MAX) Width of wedge

25 mm

Rotor Slot number

8-24 slots

Work procedure

Feeding-install fixture-plug in discharge

Fixture

Pneumatic Mechanical Fixture

Feeding form

Automatic

Lubricant form

Grease lubrication


Rotor made by this machine

rotor wedge inserting machine


Malfunctions and Troubleshooting

Malfunction

Check

A.Equipment not run even press start button

n Power and air supply

n Make sure all input signal from sensor are correct, travel switch (X10) is pressed, no signal from counter sensor (X2), push bar protector (X7) and no paper sensor(x6) and full feeding (X4). Also, there is signal from the mechanic hand (X0) and magnetic sensor (X1) of small cylinder.

n Brake is power off or not

n The feeding sensor(X3) should have signal if there is rotor on the guide way.

n Check cylinder and air pipe, make sure the pressure is between 0.4 and 0.6MPa

B. Fail to feed paper

n Check whether the paper is jammed in the feeding or discharging part, whether the upper press wheel is down pressed

C. No action or improper action in big cylinder

n Make sure the air pressure is 0.4 -0.6MPa

n Check whether the magnetic valve is functional.

n Adjust the release valve of feeding cylinder to 0.3 Mpa

D. Incorrect work indexing

n Adjust indexing screw

E. No action in small cylinder

n Check whether the mechanical valve is down pressed.

F. The position is not correct after reset

n Adjust the counter sensor screw and make sure it is on the right position after reset.

G. Paper jam

n If it was blocked in the forming tooling, the equipment would stop because of the protective switch on duty. If it was blocked behind the upper press wheel, press the stop button, now the mechanical hand still hold the rotors, press the single/automatic button to adjust it to manual, the mechanical hand will release the rotor, then take out the paper, and reset, adjust the button to automatic, and start the equipment.

Notice before Operation

(1) Confirm the shipping base on packing list after unpacking and check whether the spare parts being damaged during transportation or not. It only can be used after being installed and well debugged by our technician.

(2) To make it run normally and ensure service life, the input voltage should be AC 380V (tolerance +/-10%), and the air pressure should be between 0.4 and 0.6Mp.

(3) Reliable grounding protection is required.

(4) Don`t open the door or the safety guard when the machine is running or partially stop, either put your hand or other body part into the machine

(5) Notice the running of the machine, stop it immediately when find any abnormal conditions. Only the malfunction is solved can the machine be run again.

(6) The switch should be set on single action status when you check or maintain the equipment, and the power should be turned off.

3


Looking for ideal Automatic Armature Wedge Inserter Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Armature Slot Wedge Inserter are quality guaranteed. We are China Origin Factory of Automatic Wedge Inserter. If you have any question, please feel free to contact us.

Product Categories : Armature Manufacturing Machine > Wedge Inserting Machine

Send Inquiry

Annie

Ms. Annie

Email:

marketing2@nide-group.com

Send Inquiry

Tel:86-574-87295639

Fax:86-574-87295637

Mobile Phone:+8613738869026

Email:marketing2@nide-group.com

Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, Zhejiang