Communicate with Supplier? Supplier
Annie Ms. Annie
What can I do for you?
Contact Supplier

Ningbo Nide Mechanical Equipment Co., Ltd.


Home > Products > Armature Manufacturing Machine > Commutator Turning Machine > Fan motor armature commutator turning machine

Fan motor armature commutator turning machine
Fan motor armature commutator turning machine
Fan motor armature commutator turning machine

Fan motor armature commutator turning machine

Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF
Min. Order: 1 Set/Sets
Delivery Time: 45 Days

Basic Info

    Model No.: ND-LHL-QSFA2

    Machine Size: Middle Type

    Customized Service: Available

    Certificate: CCC

    After-sales Service: Overseas Service Center Available

    Machine Color: RAL9010 Or As Per Customer Requirement

    Type: Motor Commutator Turning Machine

Additional Info

    Packaging: wooden case package

    Productivity: 100sets

    Brand: Nide

    Transportation: Ocean,Land

    Place of Origin: China

    Supply Ability: 100 sets per year

    Certificate: ISO

Product Description

Fan motor armature Commutator Turning Machine

This type motor armature turning machine is used turning the Commutator surface. The cutter moving in lateral or radial direction is controlled by ball screws which are driven by treble-spindle servo motor. After rough turning, the machine will turn accurately. Turning times(4 times total) and cutter feeding value(≥1um) could be set up on touch screen according to user`s needs. Treble-spindle servo motor control could make stable and precise cutter feeding.

Main Component

This type Motor Commutator turning machine is consist of V-supporting device, feeding device, arm driving device and box framework. Electric servo system controls the feeding device. While servo and pneumatic system take control of arm driving device. PLC controls the whole system and displays the process on the screen..

Technical Parameter

1. Process precision

Inter-segment roundness < 1.5um, surface roughness < 0.4um

2. Speed adjustment range

The speed adjustment range is from 0Hz to 100Hz. Meanwhile, user can set any belt speed on touch screen.

3. Feeding value

It could be set up randomly among 1um-0.1um. Normally, 1st feeding value is bigger than 2nd one, 2nd one is bigger than 3rd one and last one could be set up by factory on its experience.

4. Turning times

The maximum turning time of the X spindle direction is 4 times, while so is the Z spindle direction. User could set the turning times for each rotor according to their own needs.

5. Control mode

There are two control modes, single action and automatic action. Commission can be done under the on condition of single action.

6. Operation

Setting up and parameters revise even password modification and commission can all be done in touch screen.

7. Compressed air

Air source pressure 0.5MPa~0.7Mpa(5Kgf/cm2~7Kgf/cm2)

8. Motor

AC servo motor 750W OMRON

9. Power supply

AC220V+/-5% 50Hz/60Hz

10. Weight and dimension

Around 1100KG 1300mm x 900mm x1570mm

Operation Guide

1. Basic operation

a. Turn on the air source supply to make the cylinder go back to initial position.

b. Turn on the air switch, get the power through, press the [running preparation" to make the machine go back to initial position.

c. Press [automatic", the machine will enter automatic turning status (must be done after the cutter setting finished). Press [pause" to check each action. It could begin automatic operation after cycle checking and find everything is normal.

d. Setting up dipping time (by touch screen). The pressing arm comes down while press [automatic" and oil injection begins. By the dipping time exhausts, oil injection stops accordingly. The oil injection volume could be controlled by the pressure release valve and throttle on the oil tank.

e. Press [Emergency" while abnormal operation appears.

Common breakdown analysis



If press start button,the breakdown alarm occurs

Check whether power source and air source are connected in a correct way

Check the air cylinder and circuit to see if the air pressure is 0.4-0.6Mp

Check the relevant travel switch as per the LCD screen display.

Access to the operation preparation, press start button, the machine does not work.

Check if there are rotors on the feeding device. If yes, unload the rotors

Press start button after the cutter automatically return to the initial cutting position.

X,Z spindle forward and backward travel switch breakdown.

Press emergency stop, then access to X, Z spindle cutter setting page, manually adjust the cutter to the appropriate position..

Servo motor display alarm.

Turn off the power, the turn on the machine after two minutes

The cutting position is not fixed every time

Check if the coupler screw is loose.

The robot hand doesn`t pick the rotor in the correct position.

The air pressure should be 0.4-0.6Mp

Check if the positioning screw of lower buffer is loose



Looking for ideal Motor Armature Commutator Turning Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Armature Commutator Turning Machine are quality guaranteed. We are China Origin Factory of Motor Commutator Turning Machine. If you have any question, please feel free to contact us.

Product Categories : Armature Manufacturing Machine > Commutator Turning Machine

Send Inquiry


Ms. Annie


Send Inquiry



Mobile Phone:+8613738869026

Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, Zhejiang