After-sales Service: Overseas Service Center Available
Machine Color: RAL9010 Or As Per Customer Requirement
Type: Armature Winding Machine
Function: Wind Coil Into Armature Slot
Packaging: wooden case package
Place of Origin: China
Supply Ability: 100 sets per year
This Armature Winding Machine has three winding modes: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots. It has automatic treatment for wire broken, 2 settable sequences is: winding before broken, or broken before winding.
Production parameter for 100nos armatures could be stored
Display parameter, including shift output, total output, consuming time, etc.
Automatic alarm if any abnormal condition occurs
Single action, automatic and stepping operation could be switched
Steady fixture, up and bottom protective tooling and protective wire hooking device
Loading mode: cylinder feeding armature automatically, get out finished armatures manual
Winding tooling: fast changing without tools, integral quenching HRC60-62
Buffer(small): CKD (Japan brand)
Air source treatment elements: SMC
Electromagnetic valve: SMC
Tensioner: MITSUBISHI electric magnetic powder tensioner (wire diameter range: ￠0.3~￠1.2mm)
Or WANNER (Switzerland brand) magnetic tensioner(wire diameter range: ￠0.2~￠0.45mm)
Or HMT-04 (Hangzhou Puwei) magnetic tensioner(wire diameter range: ￠0.2~￠0.45mm)
1. What is the price of this machine?
A:Firstly,we need to check your armature drawing,winding diagram(including wire diameter and turn number),so that we could check whether the machine is suitable for you or not.If not,we will recommend suitable machine for you,then give you official quotation.
2. What is the production efficiency of this machine?
A.Around 1000 pcs/8 hours,it is only a rough idea,depends on the armature slots number and turn number.
3. What is the operation steps of this machine?
A. Load armature on the shuttle manually,press START button,shuttle will deliver the armature to the winding position,and automatic winding,indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position,operator unload the finished armature,one cycle is completed.
4.What is the common malfunction of this machine?
A.Sometimes,there is servo alarm displayed on the touchscreen.In this case,there will be error code displayed on the servo driver(at the backside of machine),you could identify the problem according to the error code. The most common malfunction is the encoder cable which connects the servo driver and servo motor is loose,just need remove and reinsert the encoder cable again,problem will be solved.
5.Whether the tension value can be changed for every step?
A.There are four tension value for each step can be changed in the touchscreen: Standby tension value,Index tension value,Hang(Hooking) tension value,and Winding tension value.
Looking for ideal Automatic Armature Winding Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Auto Armature Winding Machine are quality guaranteed. We are China Origin Factory of Auto Winding Machine. If you have any question, please feel free to contact us.