Varnish Rolling Machine,Armature Varnish Rolling Machine,Automatic Varnish Rolling Machine
Ningbo Nide Mechanical Equipment Co., Ltd.[Zhejiang,China] Business Type: ManufacturerMain Mark: Asia , Europe , Middle East , Oceania , Other Markets , WorldwideExporter: 91% - 100%Certs: CE, ISO9001Description: Varnish Rolling Machine,Armature Varnish Rolling Machine,Automatic Varnish Rolling Machine
After-sales Service: Overseas Service Center Available
Machine Color: RAL9010 Or As Per Customer Requirement
Packaging: wooden case package
Place of Origin: China
Supply Ability: 100 sets per year
Automatic Armature varnish rolling machine is designed to do the insulation treatment for motor armatures. It has a big oven, which can do varnish for a large amount armatures at one time. All the process are automatic except loading and unloading process.
1. Chain pitch P=152.4mm, which is used to transform workpiece.
2. Working station: total 98 pcs
Loading area 8pcs, preheating area 20 pcs, air cooling 2 pcs, trickling 3 pcs, levelling 3 pc, gel and curing 34pcs, cooling 28pcs.
3. Stator trickling system is in the upper side of machine, which is easy for observation and inspection.
a. trickling system adopts 3 times trickling. The first two stations trickle coil outside part.(each station has two trickle nozzles)
b. the third trickling station adopts pneumatic trickling. The nozzle will strench into the inner side of workpiece.( it only trickles the coil outside core)
c. there is a detect device. If there is workpiece, machine will trickle. If no, it will not trickle.
d. there are worm pumps. Each station with one, therefore, there are in total three pumps. And the flow can be adjusted.
e.the time of each station can be adjusted.
g. trickling device is installed in a pneumatic moving frame. When in working model the trickling device moves to the working position, while in cleaning model, the trickling device moves away form working position.
4. armature adopts varnish rolling and trickling method. Firstly roll varnish, then trickle. And trickling function can be chosen.
a. this machine adopts lifting and drop type varnish groove, and it is controlled by pneumatic device. The lifting and drop travel can be adjusted.
b. After rolling varnish, there is a scrap tray to pick the varnish. And the varnish will go back to the varnish groove.
c. machine is equipped with varnish tank, and varnish is supplied by pump. There is a stainless steel cooling tray in the varnish tank. And varnish will be cooled by cycle cooling water.
d. this is a rolling varnish station. And time can be set.
e. the trickling system is equipped with one worm pump and two pieces varnish pipe. And the time and flow can be set.
5. work piece self-rotating is controlled by frequency control, 20-35r/min.
6. the preheating area, low temperature gel area and high temperature curing area all adopts far infrared black crystal tube. And machine is equipped with hot air stirring fan. The inside board of oven tunnel is mirror plane stainless steel board.
7. all the temperature of heating area is independent control. It adopts intelligent temperature control monitor PID no touch control. Machine will alarm for over temperature.
8. after work piece curing, use air cooling to decrease the workpiece temperature to 45degree or lower.
9. machine is equipped with auto lubricating system, it can add oil to main chain.(the oil volume can be adjusted. And time can be set.
10. this machine is controlled by PCL. Except for the loading and unloading, machine can automatically run. Also this machine has manual operation mode.
11. power supply: three phase five wire, AC 400V/50HZ, total power 50KW.
Looking for ideal Varnish Rolling Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Armature Varnish Rolling Machine are quality guaranteed. We are China Origin Factory of Automatic Varnish Rolling Machine. If you have any question, please feel free to contact us.